品質 理念
『一流人才,工作無錯誤;一流產品,品質零缺點。』
 
品質 政策
1、 不斷改善產品和服務品質,滿足顧客需求;
2、 持續改善企業體質,創造競爭優勢。以建立國際水準之品牌形象

品質 承諾
本公司積極追求成為一個全球化、高科技的企業集團。堅持永續發展,創造競爭優勢,提升服務品質,培養一流人才,創造一產品,是東元永遠的承諾:

一、持續改善,以提升各項產品之行銷、營業、研發與設計、採購、生產及服務過程品質。

二、確保所有產品之設計、生產及服務過程,均符合適用法令、法規及標準要求,以滿足顧客需求。

三、確保本公司品質管理系統符合國際品質管理系統要求,以持續改善企業體質。

四、藉由各項改善活動,提昇產品競爭力,以創造競爭優勢。

五、各生產基地推動國際品質管理系統,使產品與服務有一致性的水準,以建立國際水準之品牌形象。
東元 品質認證
ISO 9001 : Management System (QMS) Certification
The purpose of quality management system certification is to enhance the level of quality management of Taiwan's organizations, ensure quality of products, and protect the rights and interests of buyers and consumers. The certification standard is ISO 9001 (CNS 12681) and 1,459 organizations have been certified as of November 30, 2004.
ISO 9001:2000 is the updated standard for quality management systems, one of the best known standards issued by ISO, the International Organization for Standardization.
ISO 14001 : Environment Management System (EMS) Certification
The purpose of environment management system certification is to assist Taiwan's organizations in implementing environmental management systems, enhancing public image, and improving environmental performance so as to meet the goals of pollution prevention and sustainable development. The certification standard is ISO 14001 (CNS 14001) and 189 organizations have been certified as of November 30, 2004.
ISO/TS 16949
The ISO/TS16949 is an ISO technical specification aiming to the development of a quality management system that provides for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the ISO 9001 and the first edition was published in March 2002 as ISO/TS 16949:2002.
It was prepared by the International Automotive Task Force (IATF) and the "Technical Committee" of ISO. It harmonizes the country-specific regulations of Quality-Management-Systems.
About 30 percent of the more than 100 existing automobile manufacturers affiliate the requirements of the norm but especially the large Asian manufacturers have differentiated, own requirements for the quality management systems of their corporate group and their suppliers.
TS16949 applies to the design/development, production and, when relevant, installation and servicing of automotive-related products. It is based on ISO 9001.
The requirements are intended to be applied throughout the supply chain. For the first time vehicle assembly plants will be encouraged to seek ISO/TS16949 certification.
BSMI Mark
For industrial products announced in accordance with the Commodity Inspection Act to be subject to mandatory inspection
CSA For Canada and the U.S.
For Canada and the U.S.: A CSA mark with the indicators "C" and "US" or "NRTL/C" means that the product is certified for both the U.S. and Canadian markets, to the applicable American and Canadian standards. If a product has features from more than one area, (e.g.. electrical equipment with fuel burning features), the mark indicates compliance to all applicable Standards.
TUV : Management System (QMS) Certification
TUVdotCOM is the Internet platform for tested quality and safety. It documents all product properties, services, enterprises and systems tested and personal certifications provided by TUV Rheinland Group. The service is available to manufacturers, purchasing, wholesalers, retailers and consumers
C-UL US Listing Mark
UL introduced this new Listing Mark in early 1998. It indicates compliance with both Canadian and U.S. requirements. The Canada/U.S. UL Mark is optional. UL encourages those manufacturers with products certified for both countries to use this new, combined Mark, but they may continue using separate UL Marks for the United States and Canada.
OHSAS 18001
OHSAS 18000 is an international occupational health and safety management system specification. It comprises two parts, 18001 and 18002 and embraces a number of other publications.
For the record, the following other documents, amongst others, were used in the creation process:


BS8800:1996 Guide to occupational health and safety management systems
DNV Standard for Certification of Occupational Health and Safety Management Systems(OHSMS):1997
Technical Report NPR 5001: 1997 Guide to an occupational health and safety management system
Draft LRQA SMS 8800 Health & safety management systems assessment criteria
SGS & ISMOL ISA 2000:1997 Requirements for Safety and Health Management Systems
BVQI SafetyCert: Occupational Safety and Health Management Standard
Draft AS/NZ 4801 Occupational health and safety management systems Specification with guidance for use
Draft BSI PAS 088 Occupational health and safety management systems
UNE 81900 series of pre-standards on the Prevention of occupational risks
Draft NSAI SR 320 Recommendation for an Occupational Health and Safety (OH and S) Management System
OHSAS 18001 is an Occupation Health and Safety Assessment Series for health and safety management systems. It is intended to help an organizations to control occupational health and safety risks. It was devloped in response to widespread demand for a recognized standard against which to be certified and assessed.
| 關於東元 | 產品資訊 | 應用範疇 | 合作夥伴 | 下載專區 | 網站導覽 | 聯絡我們 | 員工專區 | Copyright © TECO GROUP. All rights reserved. Designed by W.D.D